Did you know that May is deck safety month? May is the perfect time to make sure your deck is in tip-top shape for the deck season! Check out this 10-Point Deck Safety Consumer Check List made by the NADRA.
As the snow has melted and uncovered the mess outside your home, it is now time to clean up the backyard from the long winter. One thing you need to add to your list so you can enjoy your outdoor space this spring and summer is the following 10-point consumer checklist.
With more than 50 million decks in the U.S., it is estimated that 25 million decks are past their useful life and need to be replaced or repaired by trusted services like home renovation Houston. “It’s crucial for homeowners to verify the integrity of their deck to ensure user safety as well as help extend the deck’s life-span, improve appearance, and increase livability,”
We’re proud to offer an array of tools like this Husky Wet Saw â€“ $25 to help consumers check their decks as well as connect with building professionals with the know-how to identify and remedy potential problems., in houses or buildings, and of course safety is important in these cases, so the use of industrial fixed ladders are great to make sure buildings have a safe way to go up and down.
10-Point Consumer Checklist
- Split or decaying wood – Check several different areas of the deck to be sure the wood is still sound. This includes the ledger board (where the deck attaches to the house and a common source of deck failure), support posts and joists under the deck (if you can reach them), deck boards, railings, and stairs.· Pay special attention to any areas that tend to remain damp, are regularly exposed to water, or are in contact with fasteners. Use a tool like a nice pick or a screwdriver to penetrate the wood surface. -If you can easily penetrate ¼ – ½ inch, break off a sliver of wood without splinters, or the wood is soft and spongy, decay may be present.· This is also a good time to look for small holes in the wood, which may indicate insects
- Flashing – Flashing is a metal or plastic guard that directs water out and away from sensitive areas. It’s often installed where the deck and house come together, keeping moisture and debris from collecting between the house and the deck’s ledger board. Be certain the flashing is sound and firmly in place. Consider adding or replacing flashing if you notice areas that are obviously allowing water to collect.
- Loose or corroded fasteners – Fasteners include nails, screws or anchors in the ledger board. Tighten any loose fasteners, and pound in any nails that have popped up. (Note: The ledger board should not be fastened with only nails.)· If a fastener appears rusted or corroded, consider replacing it. A corroded fastener can cause deterioration in the surrounding wood. The deck or stairs should appear even without sagging and should not sway or move when tested.
- Stairs – When choosing the correct stairlift, it is important to consider various factors. Firstly, check any railings or handrails to be sure they are firmly held in place; check also the risers and stringers to be certain they are securely attached and not decayed.· If the area behind the stair treads is open, this opening should be no more than 4” high.· Also, always keep stair pathways clear of planters, décor, toys and other items that can present a tripping hazard.
- Railings and banisters – These should be secure. This is especially important the higher your deck is off the ground.
- Cleaning and maintenance – Clean away any leaves and debris since these can be slippery and promote mildew.· If mildew is present or the deck coating has worn away, make time to clean and apply a new waterproofing coating. It can help prevent the split, decayed wood and loosened fasteners mentioned earlier.
- Grills, fire pits, chimneys, heaters, and candles – These features can create a warm and cozy deck atmosphere but make sure any source of fire or heat is safely placed away from flammable surfaces or that the deck surface is protected by a non-flammable pad.· Always use caution and follow manufacturers’ directions.
- Lighting and electrical – Be sure all lighting is working; clean any light covers to allow maximum light to shine through, and trim any plants or tree limbs that may be blocking light.· If you don’t have adequate lighting, there are a lot of great new deck lighting products you could consider to illuminate your steps and pathways, you can also consider switching to electronic transformers as they will minimize substantial energy losses (know here: when do you need a panel upgrade? or contact experts who provide panel repairs in Oklahoma City, OK)· Be sure all residential electrical outlets, circuit breakers, appliances, and features are up to code, in good condition, and childproof if children are present.· For this, you can hire a residential electrician such as the one at Safe and Sound Electric service. Watch that any electrical cords do not present a tripping hazard. If you need an electrical troubleshooting in Medfield, MA, this Paul Macrina Electrical Contracting has the experience to handle all of your electrical troubleshooting needs.
- Outdoor furniture & storage – Test all outdoor furniture to be sure it is sturdy. Avoid placing seating right at the edge of the deck. If you have a swing or hammock installed, test the chains and ropes to be sure they are secured. Consider installing childproof latches on any storage boxes and benches.· Be sure to keep all deck related chemical products stored safely away from children, including BBQ lighter fluids, matches, cleaners, etc.
- Surrounding trees – If you have trees overhanging your deck, make certain there is no danger of decaying limbs breaking free and falling from trees surrounding the deck.
Access the 10-Point Deck Safety Checklist by clicking on “Download Checklist” below
CHECKING A DECK USING THIS INFORMATION DOES NOT CONSTITUTE A CODE-COMPLIANT DECK. IT IS INTENDED TO ASSIST HOMEOWNERS.
TO SEEK A PROFESSIONAL SUCH AS A DECK BUILDER OR A HOME INSPECTOR TO GET A DECK EVALUATION CONTACT THE DECK AND DOOR COMPANY.